Roll Compactor

(R&D Model – Plain & Water Jacketed)
Model RC 25
Roll Speed 2-29 RPM Variable
Output* 2 to 5 kg/Hr.
Screw Speed 5-86 Rpm Variable
Roller Motor 3 HP / 3 Phase
Feeder Motor 2 HP / 3 Phase

Roll Compactor

  Model  RC 50 RC 75   RC 100
Output* 20 to 60 Kgs./Hr.* 75 to 100 Kgs./Hr.* 100 to 250 Kgs./Hr.*
Roll Size Ø 200 mm x 50 mm Ø 200 mm x 75 mm Ø 200 mm x 100 mm
Roll Speed 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM
Feed Screw Speed 10 to 60 RPM 10 to 60 RPM 10 to 60 RPM
Roller Motor 5 HP/960 RPM/3 Phase 5 HP/960 RPM/3 Phase 7.5 HP/960 RPM/3 Phase
Feeder Motor 3 HP / 1440 RPM / 3 Phase

Roll Compactor

  Model  RC 150  RC 200
Output* 100 to 350 gs./Hr* 150 to 400 Kgs./Hr.*
Roll Size Ø 200 mm x 150 mm Ø 200 mm x 200 mm
Roll Speed 5 to 20 RPM
Feed Screw Speed 10 to 60 RPM
Roller Motor 3 HP / 1440 RPM / 3 Phase
Feeder Motor 10 HP / 960 RPM / 3 Phase
  • Totally cGMP Compact design availably in plain water jacketed & Flame proof model.
  • It's improve the bulk density of material.
  • It's improves uniform mixing of material.
  • It's achieve better granulation of sieves analysis.
  • It's produce uniform particle size range of granules.
  • Various types of roll available to achieve maximum bulk density of output.
  • Specially designed feeding system consisting of hopper pre-densifer & variable speed drive unit.
  • Feeding unit can hydraulically lift by hydraulic pump for easy cleaning.
  • Specially design provide in the roller to prevent powder sticking on the roll.
  • Pre-compression chamber guides the powder without any slippage or leakage.
  • To prevent major accident the roll is designed to rotate reverse & forward when cleaning.
  • Specially limit switch is provided to prevent major accident.
  • Main roll drive is design with twin shaft gear box coupled with coupling to protect roll drive unit therefore perfectly synchronizing the roll with a constant torque.

Multi Mill

  Model    MM 50   MM 100    MM 150   MM 200 
Capacity 50 Kg. 100 Kg. 150 Kg. 200 Kg.
Over flow capacity 110 Ltr. 220 Ltr. 330 Ltr. 440 Ltr.
Working capacity 88 Ltr. 156 Ltr. 234 Ltr. 309 Ltr.
Speed of stirrer 35 RPM 35 RPM 30 RPM 30 RPM
Main Electric Motor 3 HP / 3 Phase 5 HP / 3 Phase 7.5 HP / 3 Phase 7.5 HP / Phase
  • Beaters & scraper blades made of SS 304
  • Drive equipped with reversible Switch.
  • Flameproof electrical components at extra cost.
  • Easy to dismantle and Clean
  • Castor Wheels Provided for mobility.
  • Designed for continuous wet or dry granulation.

Comminuting Mill

Model CM 200
Rotor speed 1000 / 2250 / 4500 RPM
Output * 25-300 Kg / Hr.
Main Electrical Motor 7.5 HP / 1440 RPM / 3 Phase
  • Designed to suit high speed milling needs with plain, water jacketed and flame proof options.
  • Fully S.S. cladding on base & S.S. guards for all moving parts to meet GMP needs.
  • Dynamically balanced fixed beater assembly as standard supply.
  • Hardened and chrome plated beaters and shaft made of SS 410.

Oscillating Granulator

  Model   OGR 30  
Hopper capacity 33 Ltr.
Screen area 388 mm (W) x 762 mm (L)
Stirrer size Ø 138 mm x 368 mm Length
Oscillation 110 Per Minute.
Output * 30 to 90 Kg./Hr.
Main Electric Motor 2 HP / 1440 RPM / 3 Phase
  • Sturdy and noiseless design.
  • Easy to operate & maintain.
  • Higher ratio of desired size granules can be obtained.
  • Simple screen holding and tensioning device Double Stirrer Granulator Also Available.

Vibro Sifter

  • Compact vibratory design for high speed & dust free sieving.
  • Noiseless and maintenance free machine.
  • All contact parts and screen made of SS 316 (SS 304 optional)
  • Low power consumption compared to reciprocating vibratory system.
  • Easy dismantling and cleaning of contact parts.
  • Machine available with flame proof and double / triple deck options
 Model   VS 20″ VS 30″   VS 36″  VS 48″   VS 60″   VS 72″  
Screen Dia. 500mm. 750 mm. 900 mm. 1200 mm. 1500 mm. 1800 mm.
Capacity/Hour * 20 to 200 Kg. 30 to 300 Kg. 30 to 325 Kg. 50 to 1000 Kg. 100 to 1500 Kg. 100 to 2000 Kg.
Charging height 1200 mm 1050 mm 1050 mm 1050 mm 1050 mm 1050 mm
Discharging height 720 mm. 670 mm. 670 mm. 670 mm. 670 mm. 670 mm.
Main Electric Motor 0.50 H /3 Phase 1.0 HP/3 Phase 1.5 HP/3 Phase 1 HP (Heavy Duty) 2 HP (Heavy Duty) 3 HP (Heavy Duty)

Octagonal Blender

  • Design Is cGMP - Current Good Manufacturing Practices Compliance
  • All Contact Parts of Food Grade Material & Non-Contact Parts of AISI 304
  • Less Power Consumption as The Blending Takes Place at Low Speed During Operation.
  • It Is Well Balanced Even in Higher Capacities.
  • It Is Very Useful for Pharmaceutical Industries Wherein Gentle Blending of Dry Granules of Powder Is to Be Done.
  • It Is a Slow Speed Blender and Has Removable Type Baffles Mounted on A Rectangular Shell.
  • The Right-Hand Side Shaft Is Connected to A Standard Gearbox which is Coupled to An Electric Motor.
  • Discharge Output Of 100-250 MM Opening with Manually Operated Butter Fly Valve
  • Full Opening with Positive Clamping
  • Standard Dust Proof Control Panel Made of AISI 304
  • Driving End Is Fully Covered with Guards
  • Inside Mirror Finish with Buff, Outside Mat Finish
  • Self-Positioning Sensor Provided to Stop the Cage at Even Position for Unload or Discharge
  • Maximum Opening on Top Cover with Silicon Seal for Opening or Manual Loading of Material Will Be Included
  • Main Operating Control Panel Located on Machine Frame
  • Push Button Provide for Start, Stop, Emergency, Speed Controller Port, Etc Over Machine FrameControl Panel
  • Overload relay protection
  • Emergency Stop Button
  • Bins with Level sensory for automatic cut off
  • Automatic Seals on shafts for Pneumatic connections
Model Capacity (Kg) Capacity (Ltr.) Gross Volume Motor (HP) Discharge Valve Dimension (L X W X H)
OB 150 60 150 165 1.5 150 1900 X 1300 X 2250
OB 300 100 300 375 1.5 150 2150 X 1550 X 2600
OB 500 165 500 600 2 200 2250 X 1800 X 2700
OB 600 200 600 725 2 200 2300 X 1800 X 2800
OB 750 250 750 875 3 200 2300 X 1850 X 2800
OB 800 265 800 950 3 200 2350 X 2000 X 2800
OB 1000 335 1000 1150 5 250 2700 X 2100 X 3050
OB 1200 400 1200 1300 5 250 2800 X 2250 X 3050
OB 1500 500 1500 1700 5 250 2850 X 2550 X 3120
OB 2000 650 2000 2200 7.5 300 2800 X 2800 X 3350
OB 2500 850 2500 2700 7.5 300 2800 X 2800 X 3450
OB 2800 950 2800 3500 10 300 2800 X 2900 X 3500

Double Cone Blender

  • DC Blender Shape Is Designed to Process Larger Volume of Material.
  • Powder Contact Parts of AISI 316
  • It Occupies Less Space Compared to Other Similar Blenders
  • All Contact Parts of Food Grade Material & Non-Contact Parts of AISI 304
  • Less Power Consumption as The Blending Takes Place at Low Speed During Operation.
  • It Is Well Balanced Even in Higher Capacities
  • It Is Very Useful for Pharmaceutical Industries Wherein Gentle Blending of Dry Granules of Powder Is to Be Done the Right-Hand Side Shaft Is Connected to A Standard Gearbox which is Coupled to An Electric Motor.
  • Full Opening with Positive Clamping
  • Standard Dust Proof Control Panel Made of AISI 304
  • Driving End Is Fully Covered with Guards
  • Inside Mirror Finish with Buff, Outside Mat Finish
  • Self-Positioning Sensor Provided to Stop the Cage at Even Position for Unload or Discharge
  • Push Button Provide for Start, Stop, Emergency, Speed Controller Port, Etc Over Machine Frame Control Panel
  • Concept Of Easy Cleaning and Changeover Capability
Model DC 100 DC 200 DC 300 DC 400 DC 600 DC 800 DC 1000
Gross Capacity (Ltr.) 150 300 470 615 770 1000 1500
Working Capacity (Ltr.) 100 200 300 400 600 800 1000
Discharge Height (MM) 450 450 450 450 450 450 450
Discharge Valve 100 100 200 200 200 200 200
Motor (HP) 2 3 5 5 7.5 7.5 10
Length (MM) 1400 1850 2000 2100 2200 2300 2350
Width (MM) 800 900 1100 1200 1300 1400 1450
Height (MM) 1500 1900 2000 2100 2200 2300 2350

V-Type Blender

Model VB 50 VB 100 VB 200 VB 500 VB 1000 VB 1200
Gross Capacity (Ltr.) 50 100 200 500 1000 1850
Working Capacity (Ltr.) 30 55 110 280 560 1200
Motor (HP) 1.5 2 2.5 7.5 10 15
Length (MM) 1100 1400 1525 1850 2000 2300
Width (MM) 760 760 1000 1100 1250 1400
Height (MM) 1375 1575 2450 2770 3800 4200
  • Minimal Attrition when blending gragile granules.
  • Large-Capacity equipment available
  • Easy to load and unload
  • Easy to clean
  • Minimal maintenance.

Mass Mixer

Model MX 50 MX100 MX 150 MX 200
Capacity 50 Kgs. 100 Kgs. 150 Kgs. 200 Kgs.
Over flow capacity 110 Ltrs. 220 Ltrs. 330 Ltrs. 440 Ltrs.
Working capacity 88 Ltrs. 156 Ltrs. 234 Ltrs. 309 Ltrs.
Speed of stirrer 35 RPM 35 RPM 30 RPM 30 RPM
Main Electric Motor 3 HP / 3 Phase 5 HP / 3 Phase 7.5 HP / 3 Phase 7.5 HP / 3 Phase
  • R&D Model from 10 to 25 Kg. Available on customer’s demand.
  • All contact parts are made of SS 316
  • Thrust bearings are provided to carry rigid and thrust load.
  • Easy for cleaning and operating.
  • Interlocked acrylic dust cover for inspecting the mixing process.
  • The tilting device provided for easy unloading of the material.
  • Design Is cGMP - Current Good Manufacturing Practices Compliance
  • Compact Design and All Contact Parts in AISI 316
  • ShellConsisting Of ‘U’ Trough of Suitable Dimensions. Construction Of Stainless Steel and Side Plates Made of Mild Steel. Stiffeners Provide at Necessary Places for Rigidness
  • Mixing Mechanism Is with Paddle Type Blades Welded to The Main Shaft for Efficient Mixing of Thick Heavy Material. PTFE Gland Mechanism Provided at Shaft Ends Prevents Entry of External Powder into The Trough and Prevents Leakages
  • Due To Paddle Type Blades, It Also Called Paddle Mixer or Paddle Type Blender.
  • Bottom Discharge with Butterfly Valve for Regulated Discharge
  • 3 Phase AC Motor Coupled to Suitable Worm Gear, With Driving Shafts Mounted on Suitable Plumber Block.
  • Secure Mounting with Protective Covers for Belts and Couplings.
  • Designed For Atmospheric Operation.
  • Top Cover Depending on The Length of The Blender.
  • Centrally Located Flush Bottom Discharge Valve
  • Stuffing Boxes with Easily Disassembled Housings Along with Teflon Gland Packing
  • Worm Reduction Gearbox with Single Speed Drive
  • Blender Is Mounted on Supports Providing Adequate Discharge Clearance.
  • Shaft With Mechanical Seals.
  • Total drive transmission system enclosed
  • Limit switch installed in the top lid ensure lid is closed

Ribbon Blender

  • Design Is cGMP - Current Good Manufacturing Practices Compliance
  • Compact Design and All Contact Parts in AISI 316
  • Ribbon Blenders Consist of a U-Shaped Horizontal Trough and A Specially Fabricated Ribbon Agitator.
  • Complete Process of Mixing and Blending in One Unit
  • Suitable For Mixing Solids with Solids and Solids with Liquids
  • Shorter Batch Time Due to Contra Mixing Ribbons
  • All Contact Parts Are Made of SS 316 And Mirror Polished
  • Flush Plug Valve from Discharging Finished Product Without Dead Zone
  • It Achieves Consistent and High Shear Mixing
  • Manufactured With High Quality and Durable Materials
  • Versatile Design Which Can Be Used in A Wide Range of Materials
  • Able To Achieve Triple Mixing Action
  • Clean And Hygienic Operating Process
Model Volume in Ltrs. Motor HP
RB 500 500 7.5
RB 1000 1000 10
RB 1500 1500 12.5
RB 2000 2000 15
RB 3000 3000 20
RB 4000 4000 25
RB 5000 5000 25
RB 6000 6000 30
RB 8000 8000 40
RB 10000 10000 40

Rapid Mixer Granulator

  • Operation based on PLC control
  • Better productivity & lesser mixing time
  • Contact parts are SS 316/316L
  • Uniform mixing & granulation
  • Less handling, more hygienic
  • Impellers fixed at the bottom
  • Specially designed small blades
  • Chopper and Impeller Speed Control with ACVFD
  • HMI provided for User Friendly Control and Easy of Operations
  • 21 CFR Part 11 Compliance with SCADA Software - Optional
  • Co – Mill / Wet Mill as per Application - Optional
Model Gross Volume Liter Working Volume Liter Mixer Motor (HP) Chopper Motor (HP) Comp. Air Pressure (bar) Power Supply
RMG 10 10 8 1.5 1 6 220V, 1 Ph AC
RMG 25 25 20 3 1.5 415V, 3 Ph AC
RMG 50 50 40 5 3
RMG 100 100 80 10 3
RMG 150 150 120 15 5
RMG 250 250 200 30 5
RMG 400 400 320 40 7.5
RMG 600 600 480 50 10
RMG 800 800 640 60 15
RMG 1000 1000 800 75 25
RMG 1200 1200 960 100 30

Fluid Bed Dryer

  • Operational fluency
  • Robust & Rigid construction
  • Advance Automation Lower maintenance
  • Energy efficiency
  • Models up to 500 – 1000 Kgs / batch available. Specifications available on request.
  • Dimensions & Technical Details are subject to change as per customers' requirement
  • Blower Motor with ACVFD
  • Inbuilt AHU and Power Panel
  • HMI provided for User Friendly Control and Easy of Operations
  • 21 CFR Part 11 Compliance with SCADA Software - Optional
Model FBD 15 FBD 30 FBD 60 FBD 120 FBD 200 FBD 250 FBD 300
Container Volume (Litters) 50 100 220 430 590 780 950
Batch Capacity (Kg.) 15-20 30-40 60-75 120-140 200-225 250-280 300-350
Drying Temp oC 50-80 50-80 50-80 50-80 50-80 50-80 50-80
Blower Motor HP 3 5 10 15 20 25 30
Heating Load: kW for Electrical Heating 9 18 36 54 Electrical heating not Recommended
Approximately Steam Consumption Kgs./hr at Steam pressure 3 Kg/cm2 15 25 50 100 160 200 250

Tray Dryer

  • Available in 12, 24, 48 & 96 Trays.
  • Design is cGMP – Current Good Manufacturing Practices compliance.
  • All contact parts AISI 316/304 & non-contact parts AISI 304/ M.S. with painted.
  • Highly effective uniform air re-circulating system by low-speed fan.
  • Inlet air filter and damper at inlet and exhaust air damper for air flow controls.
  • Controls panel with Digital temperature controller and process timer controller.
  • Mobile trolleys are provided which are used to load and unload the trays into the dryer.
  • Models up to 500 – 1000 Kgs / batch available. Specifications available on request.
  • Dimensions & Technical Details are subject to change as per customers' requirement
  Model  TD 12 TD 24  TD 48  TD 96
Loading capacity12 Trays24 Trays48 Trays96 Trays
External Dimension (WXDXH) mm1370X530X9401370X940X9401980X1020X18803320X1900X1880
Internal Dimension In mm840X430X840840X860X8401020X930X18301960X930 X1830
No of DoorsOneOneOneTwo
No of BlowersOneTwoTwoTwo
No of motors/ HP 3 Phase / 415V1/0.5 HP1/0.5 HP1/1 HP2/1 HP
Electrical Heating Load for 100°C/200°C /300°C3kw/6kw/9kw6kw/9kw/12kw9kw/15kw/18kw15kw/21kw/27kw
Steam Heater No. of coils.2222
Steam Pressure3.3 kg/cm23.3 kg/cm23.3 kg/cm23.3 kg/cm2
Steam consumption25 LBS/hr45 LBS/hr60 LBS/hr80 LBS/hr
Insulation in mm 100°C/ 200°C/ 300°C50/75/7550/75/7550/75/7550/75/75
No of TrolleysRack SystemRack SystemOneTwo
Tray Size812X 406 X 31812X 406 X 31812X 406 X 31812X 406 X 31
Trolley DimensionFixed RacksFixed Racks840X960X1780840X960X1780

Conventional Coating Pan

  • Hot air blowing system is with temperature control probe.
  • Coating Pan is engineered to the perfection from SS 316 only and (SS 316L Optional).
  • Machines are with Peristaltic Pump.
  • Machines are with SS 316 Gun, Spray Nozzle and SS 304 Stand.
  • Totally enclosed machine drive and hot air blowing system.
  • 12″ or 48″ Coating Machine has variable speed drive. Hot air blowing system is separate.
ModelCP 18”CP 30”CP 36”CP 42”CP 48”CP 60”CP 72”
Working Capacity  in Liters approx.124075125200310520
Pan RPM (Empty / Max.)28282424241210
Inlet Blower (CFM)20040040050055010002000
Exhaust Blower (CFM)40050050070080015003500
Heater (KW)366991221
Main Drive Motor (H.P.)1223357.5
Inlet Blower Motor (H.P.)0.75111.51.535
Exhaust Blower Motor (H.P.)11122510

Auto Coater

  • Design and finish comply with cGMP standards.
  • Contact Parts of SS 316
  • Perforated pan with rabbit-ear type baffles.
  • PLC with Human Machine Interface.
  • Spray angle and distance to the tablet bed can be adjusted.
  • Solution tank with Stirrer, Peristaltic pump and Anti-bearding spray gun ensures efficient coating.
  • Tablet unloading attachment ensures discharge of every single tablet without manual intervention.
  • HEPA filter, Variable frequency drives, Scrubbers, PID control valve can be supplied as an option.
  • 21 CFR Part 11 Compliance with SCADA Software - Optional
ModelAC 24”AC 36”AC 48”AC 60”
Approximate working capacities10 Kgs75 Kgs150 Kgs350 Kgs­
Pan Diameter610 mm915 mm1220 mm1575 mm
Pan Speed5-15 RPM2-12 RPM2-12 RPM2-10 RPM
Drive Motor1 HP2 HP3 HP7.5 HP
Hot Air Blower Motor1 HP3HP5HP10 HP
Hot Air Blower Capacity300 CFM1200 CFM2300 CFM5000 CFM
Exhaust Blower Capacity350 CFM1350 CFM2750 CFM6000 CFM
Steam Consumption Pressure @ 3 to 5 Kg / cm²)25 Kgs / hr or50 Kgs / hr or100 Kgs / hr200 Kgs / hr
Steam Consumption Required CFM15 CFM30 CFM40 CFM50 CFM
Compressed Air requirement at 6 Kgs / cm² pressure(25 NM³ / hr)(51 NM³ / hr)(68 NM³ / hr)(85 NM³ / hr)

Colloidal Mill

  • Contact Parts Are Manufactured from AISI 316
  • Non-Contact Parts Are Manufactured from AISI 304
  • Milling Rotor Made of AISI 316
  • 3 Way Valve with Re-circulation Pipe
  • Jacketed - Hopper & Re-circulation Pipe (Optional)
  • Flame Proof Motor (Optional)
  • Inline Mill - Direct Drive With VFD (Optional)
Colloidal Mill
Model No.COM 05COM 50COM 100COM 200
Out Put Liter / Hour150-1500150-1500200-3000300-5000
Particle Size Reduction5 -10 Microns5 -10 Microns5 -10 Microns5 -10 Microns
Hopper Capacity5 Liter15 Liter20 Liter30 Liter
Drive TypeBeltBeltBeltBelt
Main Motor1 HP3 HP5 HP7.5 HP
Charging Height800120012001500